- Over time the number and size of these factories have increased, especially the `DOMFilterFactory` class, and this split should thus aid readability/maintainability of the code.
- By introducing a couple of new import maps we can avoid bundling the `DOMCMapReaderFactory`/`DOMStandardFontDataFactory` classes in the Firefox PDF Viewer, since they are dead code there given that worker-thread fetching is always being used.
- This patch has been successfully tested, by running `$ ./mach test toolkit/components/pdfjs/`, in a local Firefox artifact-build.
*Note:* This patch reduces the size of the `gulp mozcentral` output by `1.3` kilo-bytes, which isn't a lot but still cannot hurt.
After the binary CMap format had been added there were also some ideas about *maybe* providing other formats, see [here](https://github.com/mozilla/pdf.js/pull/8064#issuecomment-279730182), however that was over seven years ago and we still only use binary CMaps.
Hence it now seems reasonable to simplify the relevant code by removing `CMapCompressionType` and instead just use a boolean to indicate the type of the built-in CMaps.
This unifies the various factory-options, since it's consistent with `CMapReaderFactory`/`StandardFontDataFactory`, and ensures that any needed parameters will always be consistently provided when creating `CanvasFactory`/`FilterFactory`-instances.
As shown in the modified example this may simplify some custom implementations, since we now provide the ability to access the `CanvasFactory`-instance used with a particular `getDocument`-invocation.
Note that the textContent is returned in "chunks" from the API, through the use of `ReadableStream`s, and on the main-thread we're (normally) using just one temporary canvas in order to measure the size of the textLayer `span`s; see the [`#layout`](5b4c2fe1a8/src/display/text_layer.js (L396-L428)) method.
*Order of events, for parallel textLayer rendering:*
1. Call [`render`](5b4c2fe1a8/src/display/text_layer.js (L155-L177)) of the textLayer for page A.
2. Immediately call `render` of the textLayer for page B.
3. The first text-chunk for pageA arrives, and it's parsed/layout which means updating the cached [fontSize/fontFamily](5b4c2fe1a8/src/display/text_layer.js (L409-L413)) for the textLayer of page A.
4. The first text-chunk for pageB arrives, which means updating the cached fontSize/fontFamily *for the textLayer of page B* since this data is unique to each `TextLayer`-instance.
5. The second text-chunk for pageA arrives, and we don't update the canvas-font since the cached fontSize/fontFamily still apply from step 3 above.
Where this potentially breaks down is between the last steps, since we're using just one temporary canvas for all measurements but have *individual* fontSize/fontFamily caches for each textLayer.
Hence it's possible that the canvas-font has actually changed, despite the cached values suggesting otherwise, and to address this we instead cache the fontSize/fontFamily globally through a new (static) helper method.
*Note:* Includes a basic unit-test, using dummy text-content, which fails on `master` and passes with this patch.
Finally, pun intended, ensure that temporary textLayer-data is cleared *before* the `render`-promise resolves to avoid any intermittent problems in the unit-tests.
The idea is to insert a span in the text layer with an aria-role set to img
and use the bounding box provided by the attribute field in the tag dict in
order to have non-null dimensions for the image to make it "visible".
The `Headers` functionality is now available in all browsers/environments that we support, which allows us to consolidate and simplify how the `httpHeaders` API-option is handled; see https://developer.mozilla.org/en-US/docs/Web/API/Headers#browser_compatibility
Also, simplifies the old `NetworkManager`-constructor a little bit.
The Node.js url.parse API (https://nodejs.org/api/url.html#urlparseurlstring-parsequerystring-slashesdenotehost)
is deprecated because it's prone to security issues (to the point that Node.js doesn't even publish CVEs for it anymore).
The official reccomendation is to instead use the global URL constructor, available both in Node.js and in browsers.
Node.js filesystem APIs accept URL objects as parameter, so this also avoids a few URL->filepath conversions.
This patch allows embedders of PDF.js to provide custom match
logic for seaching in PDFs. This is done by subclassing the
PDFFindController class and overriding the `match` method.
`match` is called once per PDF page, receives as parameters the
search query, the page contents, and the page index, and returns
an array of { index, length } objects representing the search
results.
This is possible thanks to features, i.e. private fields and in particular static initialization blocks, that didn't exist back when we started using classes in the code-base.
The current error-messages also mention internal parameters, which an end-user obviously don't have to care about. So, let's try to avoid confusion here by only including the API parameters.
According to the PDF specification these destinations should have a zoom parameter, which may however be `null`, but it shouldn't be omitted; please see https://opensource.adobe.com/dc-acrobat-sdk-docs/pdfstandards/PDF32000_2008.pdf#G11.2095870
Hence we try to work-around bad PDF generators by making the zoom parameter optional when validating explicit destinations in both the worker and the viewer.
As far as I can tell `Outliner` is only exposed in the API because we need to access it when running some of the reference-tests, but is otherwise not used.
Hence this seems like something that should be kept *internal* and thus only exposed in TESTING-builds.
According to the PDF specification these destinations should have a coordinate parameter, which may however be `null`, but it shouldn't be omitted; please see https://opensource.adobe.com/dc-acrobat-sdk-docs/pdfstandards/PDF32000_2008.pdf#G11.2095870
Hence we try to work-around bad PDF generators by making the coordinate parameter optional when validating explicit destinations in both the worker and the viewer.
Add unit test to check compatability with such cmaps
In the PDF in issue 18099. the toUnicode cmap had a line to map the glyph char codes from 00 to 7F to the corresponding code points. The syntax to map a range of char codes to a range of unicode code points is
<start_char_code> <end_char_code> <start_unicode_codepoint>
As the unicode code points are supposed to be given in UTF-16 BE, the PDF's line SHOULD have probably read
<00> <7F> <0000>
Instead it omitted two leading zeros from the UTF-16 like this
<00> <7F> <00>
This confused PDF.js into mapping these character codes to the UTF-16 characters with the corresponding HIGH bytes (01 became \u0100, 02 became \u0200, et cetera), which ended up turning latin text in the PDF into chinese when it was copied
I'm not sure if the PDF spec actually allows PDFs to do this, but since there's at least one PDF in the wild that does and other PDF readers read it correctly, PDF.js should probably support this
This unit test fails occasionally (albeit much less than before thanks
to PR #17663), so we change the parsing time check's divisor to prevent
it from happening again. If the last page's rendering time is less than
or equal to 50% of the first page's rendering time that should be enough
proof that no worker thread re-parsing occurred while also providing a
wide enough range to avoid intermittents.
Note that the assertion is now equal to the one we already have in the
"caches image resources at the document/page level, with main-thread
copying of complex images (issue 11518)" unit test which seems to work
reliably so far.
The `renderForms` parameter pre-dates the introduction of the general `intent` parameter, which means that we're now effectively passing the same state twice to these `getOperatorList` methods.
Currently errors in `afterAll` are logged, but don't fail the tests.
This could cause new errors during test teardown to go by unnoticed.
Moreover, the integration test use a different reporting mechanism which
also handled errors differently (this is extra reason to do #12730).
This patch fixes the issues by consistently handling errors in
`suiteStarted` and `suiteDone` in both reporting mechanisms.
Fixes#18319.
Allow apps with supportsIntegratedFind to better monitor the find state.
A recognized use case is the Firefox findbar, its "not found" sound must
consider `entireWord` and only make noise when it is off.
See related implementation in
https://hg.mozilla.org/mozilla-central/rev/16b902cbcf26
This change can help if we have to move the implementation from cpp to jsm.
If for example dd:mm is failing we just try with d:m which is equivalent
to the regex /d{1,2}:m{1,2}/. This way it allows the user to forget the
0 for the first days/months.
Instead of sending to the main thread an array of Objects for a list of points (or quadpoints),
we'll send just a basic float buffer.
It should slightly improve performances (especially when cloning the data) and use slightly less memory.
- Move the definition of the `loadingParams` Object, to simplify the code.
- Add a unit-test, since none existed and the viewer depends on this functionality.
This is very old code, and predates e.g. the introduction of JavaScript classes, which creates unnecessarily unwieldy code in the viewer.
By introducing a new `TextLayer` class in the API, similar to how e.g. the `AnnotationLayer` looks, we're able to keep most parameters on the class-instance itself. This removes the need to manually track them in the viewer, and simplifies the call-sites.
This also removes the `numTextDivs` parameter from the "textlayerrendered" event, since that's only added to support default-viewer functionality that no longer exists.
Finally we try, as far as possible, to polyfill the old `renderTextLayer` and `updateTextLayer` functions since they are exposed in the library API.
For *simple* invocations of `renderTextLayer` the behaviour should thus be the same, with only a warning printed in the console.
The issue from #18003 hasn't been shown to be caused by PDF.js, but it
did surface that we don't have (direct) unit test coverage for the
`BaseException` class. This made it more difficult to prove that the
`stack` property was already available on exception instances, but more
importantly it caused the CI to be green even though the suggested
change would have caused the `stack` property to disappear.
To avoid future regressions, for e.g. similar changes or a rewrite from
a closure to a proper class, this commit introduces a dedicated unit
test for `BaseException` that asserts that our exception instances
indeed expose all expected properties.
For images that failed to decode once we want to avoid a pointless round-trip to the main-thread, which could otherwise happen for globally cached images.
- These changes will allow a simpler way of implementing PR 17770.
- The /Lang attribute is fetched lazily, with the first `getTextContent` invocation. Given the existing worker-thread caching, this will thus only need to be done *once* per PDF document (and most PDFs don't included this data).
- This makes the /Lang attribute *directly available* in the `textLayer`, which has the following advantages:
- We don't need to block, and thus delay, overall viewer initialization on fetching it (nor pass it around throughout the viewer).
- Third-party users of the `textLayer` will automatically benefit from this, once we start actually using the /Lang attribute in PR 17770.
*Please note:* This also, importantly, means that the `text` reference-tests will then cover this code (which wouldn't otherwise have been the case).
The only reason that this code still accepts `TextContent` is for backward-compatibility purposes, so we can simplify the implementation by always using a `ReadableStream` internally.
